| Home | NC Title V | NC MACT | Coal-Fired EGUs | People | Technical | Links |
|---|
| Unilin Flooring Home | Emissions | Controls | Map/Photos | IBEAM |
|---|
1. one natural gas-fired or No. 2 fuel oil-fired regenerative thermal oxidizer (ID No. CD-RTO) installed in series with aqueous assisted fiber removal chamber (ID No. CD-SCRB) installed on the combined emissions of:
NSPS a. one multicylone (304, 9 inch diameter tubes, ID No. CD-01) and a Selective Non-Catalytic Oxidation (CD-SNCR) unit installed on one heating plant (ID No. ES-HP) consisting of (1) wood fired boiler (130 million Btu per hour); one sanderdust duct burner system (52 million Btu per hour); two (2) No. 2 fuel oil fired auxiliary burners (heat input of 41 million Btu per hour each); one (1) No. 2 fuel oil fired auxiliary burner (75 million Btu per hour heat input), two (2) natural gas fired auxiliary burners (heat input of 41 million Btu per hour each); and one (1) natural gas fired auxiliary burner (75 million Btu per hour heat input)
b. one (1) blowline flash-tube dryer (ID No. ES-DRY),
c. hot oil heated continuous board press (ID No. BP), and
d. one pressurized refiner (ES-RFN)
2. Fugitive emission sources including:
a. board breaker and conveyer (ID No. F-08), and
b. board cooling and stacking area (ID F-BC)
3. one bagfilter (3,702 square feet of filter area, ID No. FF21) installed in series with one simple cyclone (140 inches in diameter, ID No. CY21) installed on the dried fiber grader system #1 (ID No. ES-21),
4. one bagfilter (3,702 square feet of filter area, ID No. FF22) installed in series with one simple cyclone (140 inches in diameter, ID No. CY22) installed on the dried fiber grader system #2 (ID No. ES-22),
5. one bagfilter (15,069 square feet of filter area, ID No. FF23) installed in series with two parallel simple cyclones (124 inches in diameter, ID Nos. CY23A and 157 inches in diameter CY23B) installed on the mat trimmings return air system (ID No. ES-23),
6. one bagfilter (6,150 square feet of filter area, ID No. FF31) installed on the fine sanderdust pneumatic conveyer system (ID No. ES-31),
7. one bagfilter (8,680 square feet of filter area, ID No. FF32) installed on the coarse sanderdust pneumatic conveyer system (ID No. ES-32),
8. one bagfilter (4,650 square feet of filter area, ID No. FF33) installed on the sawing and cutting pneumatic conveyer system (ID No. ES-33),
9. one bagfilter (3,020 square feet of filter area, ID No. FF34) installed in series with one simple cyclone (98 inches in diameter, ID No. CY34) installed on the press trim saw and dust collection system (ID No. ES-34),
NSPS 10. four fixed roof resin storage tanks (30,000 gallon capacity each, ID Nos. ES-40a,b,c and d), and one fixed roof resin storage tank (25,000 gallon capacity, ID No. ES-40e)
NSPS 11. one fixed roof wax storage tank (25,000gallon capacity), ID No. ES-40f)
12. one diesel-fired 500 kw emergency generator (ID No. ES-41), and
13. one rotographic surface coating line (ID No. ES-50)